Wire Armour™ Specialty Tapes


Linerless Rubber Tape

An ethylene rubber-based, high voltage tape possessing excellent electrical, chemical, and physical properties. Use linerless, self-bonding tapes when insulating and jacketing splices on power cable from 600 volts to 69,000 volts. Allows quicker taping speeds than liner tape and yields a uniform, void-free build-up while contouring unusual shapes.

  • 30 mil thickness
  • Linerless, self-bonding
  • Excellent ozone resistance
  • Conformability to complex shapes
  • Moisture, corrosion, and chemical resistant
  • High thermal conductivity allowing heat to dissipate from joint
  • Flame retardant
  • Lead-free
  • Overload temperature: 266°F
  • Elongation: 890%
  • 1″ wide x 30′ long

Rubber Mastic Tape

A self-bonding mastic tape consisting of an ethylene propylene rubber (EPR) backing, bonded to a tacky, temperature stable, electrical grade mastic. Use for insulating and moisture sealing splices and terminations up to 2,000 volts on solid dielectric cable. Can be wrapped, stretched, or molded around irregular shapes for insulation build-up, water sealing and surface protection. For bus bar insulation and corrosion protection.

  • 65 mil thickness
  • Excellent electrical properties
  • Superior adhesion
  • UV resistant
  • Moisture, corrosion, and chemical resistant
  • Suitable for direct burial and overhead applications
  • 1” wide x 10’ long

Vinyl Mastic Pads

An insulating mastic with vinyl backing provides superior adhesion and dielectric strength required to seal and insulate electrical connections on buried, submerged, or overhead cables up to 1,000 volts. The vinyl backing adds mechanical strength and is UV resistant. Impermeable to ozone, water, dirt, and corrosive chemicals and adheres quickly and permanently without affecting the insulation or conductive polymer shielding.

  • 130 mil thickness
  • High dielectric strength
  • Superior adhesion to metal, cable insulations, and jackets
  • UV resistant
  • Moisture, corrosion, and chemical resistant
  • Suitable for direct burial, submerged, and overhead applications
  • Vinyl backing
  • Package of 10
  • Size: 6.5″ x 4″

Corrosion Tape

A corrosion protection, pressure sensitive vinyl tape giving complete environmental, mechanical, and electrical protection for all types of pipe wrapping applications. UV, bacteria, and fungus resistant. Can be used for both overhead and direct burial applications.

  • 10 mil thickness
  • Highly resistant to sun, water, oil, acids, alkalis, and corrosive chemicals
  • Lead-free
  • Bacteria and fungus resistant
  • Abrasion-resistant
  • 2″ wide x 100′ long

Begin typing your search above and press return to search.